README

node-rabbitmq

Major version changes

Version 2:

Publishing messages now defaults to using publisher confirms

Implementation details

Everything happens on the same TCP connection to RabbitMQ. It is created first time it is needed, and cached for subsequent requests.
Message consumption and publishing use separate channels. They are created first time they are needed, and cached for subsequent requests.

Connection/channel failure

If the channel or connection closes unexpectedly (i.e. #close() was not called), the library will attempt to reconnect and re-attach the existing consumers transparently.

Re-connection will be attempted using fibonacci backoff with a maximum delay of 1 minute, meaning that the following delays (seconds) will be used between re-connection failures: 1, 1, 2, 3, 5, 10, 20, 30, 50, 60, 60, 60...

`CoinifyRabbit` API

JavaScript

const CoinifyRabbit = require('@coinify/rabbitmq');

TypeScript

import CoinifyRabbit from '@coinify/rabbitmq';

`new CoinifyRabbit(options)`

Creates a new instance of CoinifyRabbit

The options argument overrides default configuration options that are specified in the DEFAULT_CONFIGURATION object in src/CoinifyRabbitConfiguration.ts.

const options = {
  logger: null, // Bunyan-compatible logger
  service: { // Service-specific options
    name: 'my-service' // Different service names consume events from different queues
  }
  // For all configuration options, see getDefaultConfig() static function
};

const coinifyRabbit = new CoinifyRabbit(options);

`#shutdown(timeout=null): Promise<void>`

Perform graceful shutdown, optionally with a timeout.

Calling this function closes the active channel and connection, if they are open. It also stops consuming messages and waits for active consumer functions to finish within the given timeout.

The timeout argument specifies the number of milliseconds to wait for all consumer functions to finish. If one or more active consumer function haven't finished in this time, they are nack'ed and returned to the queue where they came from.

If timeout = null, there is no timeout and shutdown() will wait for all consumer functions to finish.

The promise resolves when connection and channel is closed, and all consumer functions are have finished or the timeout has been reached.

Events

Topology

All events are published to the topic exchange with the name defined in options.exchanges.eventsTopic. The name defaults to 'events.topic', and shouldn't really be changed unless you know what you're doing.

Emitting an event (using #emitEvent(eventName, context)) publishes a message to this exchange, with the routing key config.service.name + '.' + eventName.

Subscribing to consuming an event (using #registerEventConsumer(eventKey, options, consumeFn)) binds a queue to this exchange, using eventKey as the binding key. The queue name is determined by the (eventKey, config.service.name) pair, meaning that if multiple consumers call the registerEventConsumer function with the same eventKey and having the same config.service.name, they will consume from the same queue. Specifically, the queue name is 'events.' + options.service.name + '.' + eventKey.

Event message

Emitting an event with name eventName and context context publishes the following JSON object:

{
  eventName: fullEventName, // serviceName + '.' + eventName
  context: context,
  uuid: 'd51bbaed-1ee8-4bb6-a739-cee5b56ee518', // Actual UUID generated upon emit
  time: 1504865878534 // Timestamp of event, in milliseconds since UNIX epoc
}

Example

const CoinifyRabbit = require('@coinify/rabbitmq');

const coinifyRabbit = new CoinifyRabbit({service: {name: 'my-service'}});

async function testEvent() {
    await coinifyRabbit.registerEventConsumer('my-service.my-event', async (context, event) => {
      const {eventName, uuid, time} = event;
      console.log('Event consumed', {context, eventName, uuid, time});
      process.exit(0);
    });

    await coinifyRabbit.emitEvent('my-event', {myContext: true});
}

testEvent();

`#emitEvent(eventName, context, options={}): Promise<{eventName, context, uuid, time}>`

Emits an event with an associated context

const result = await coinifyRabbit.emitEvent('my-event', {myContext: true});

// result is an object with the below keys
const {eventName, context, uuid, time} = result;

NOTE: If options.service.name is defined, the actual emitted eventName is prefixed with the service name and a dot (.).

`#registerEventConsumer(eventKey, consumeFn, options = {}): Promise<string>`

Registers a function for consuming a specific event

const consumerTag = await coinifyRabbit.registerEventConsumer('my-service.my-event', async(context, event) => {
  // Resolve to ACK event, removing it from the queue
  // Reject and event will not be ACK'ed

  // context is the same as emitted context object
  // event is object of {eventName, uuid, time}
  console.log({context, event});
});

// consumerTag is used to cancel consumer again at a later point. (Not yet implemented)

The following properties can be set in options:

retry: Configure retry mechanism for this consumer. See Retry section for more information
uniqueQueue: Create a unique queue (true) instead of default behaviour (false) where each instance of the service consumes from the same queue. Setting this to true will cause the event to be consumed by each event consumer.
consumer: Consumer-specific options. Must be an object with the following properties:
- prefetch: Prefetch value for this consumer. See Prefetch section for more information.
usePublisherConfirm: Use publisher confirms as default for publishing messages. Defaults to true.
service: Service-specific options. Must be an object with the following properties:
- name: Overrides the options.service.name set in the CoinifyRabbit constructor. Prefixes the consumed task name with name and a dot (.).

`eventKey` wildcards

Given that events are emitted to a RabbitMQ topic exchange, you can use wildcards in the eventKey argument to consume more than one event. Dots (.) are used to separate words, which can be replaced with wildcards.

* can substitute for exactly one word
# can substitute for zero or more words

Examples

Imagine that four consumers are registered, using the following eventKeys:

(a) my-service.my-event.happened (specific event, no wildcards)
(b) my-service.my-event.*
(c) my-service.#
(d) #

Then, four events with the following event names are emitted:

my-service.my-event.happened
- Consumed by all 4 consumers (a+b+c+d)
my-service.my-event.failed
- Consumed by 3 consumers (b+c+d)
my-service.another-event.happened
- Consumed by 2 consumers (c+d)
yourService.shit.hit.the.fan
- Consumed only by consumer (d)

Tasks

Topology

All tasks are published to the topic exchange with the name defined in options.exchanges.tasksTopic. The name defaults to 'tasks.topic', and shouldn't really be changed unless you know what you're doing.

Enqueueing a task (using #enqueueTask(taskName, context)) publishes a message to this exchange, with the routing key taskName.

Subscribing to consuming a task (using #registerTaskConsumer(taskName, consumeFn)) creates a queue with the name 'tasks.' + options.service.name + '.' + taskName, and binds it to the exchange, using options.service.name + '.' + taskName as the binding key.

A task can be enqueued delayed, meaning that it won't be available for consumers until a specified delay has passed. See the below "Delayed tasks" section for more information.

Task message

Enqueueing a task with name taskName and context context publishes the following JSON object:

{
  "taskName": taskName,
  "context": context,
  "uuid": 'f07d33d7-f56f-4c89-9489-1bc89d3a6483', // Actual UUID generated upon emit
  "time": 1506331856322, // Timestamp of task, in milliseconds since UNIX epoc
  "attempt": 0, // number of current attempt. Used by retry mechanism
  "origin": 'another-service', // Name of service that enqueued the task
  "delayMillis": 60000 // Only present if task was enqueued as a delayed task
}

Example

const CoinifyRabbit = require('@coinify/rabbitmq');

const coinifyRabbit = new CoinifyRabbit({service: {name: 'my-service'}});

async function testTask() {
    await rabbit.registerTaskConsumer('my-task', async (context, task) => {
      const {taskName, uuid, time} = task;
      console.log('Task consumed', {context, taskName, uuid, time});
      process.exit(0);
    });
    await rabbit.enqueueTask('my-service.my-task', context);
}

testTask();

`#enqueueTask(taskName, context, options={}): Promise<{taskName, context, uuid, time}>`

Enqueues a task with an associated context

const result = await coinifyRabbit.enqueueTask('my-service.my-task', {myContext: true});

// result is true if task was enqueued correctly.

Delayed tasks

In order to enqueue a delayed task, you must specify a delayMillis field in the options object when calling enqueueTask(). The following example enqueues a task that will not be ready for consumption until 1 minute (60 seconds) later:

await coinifyRabbit.enqueueTask('my-service.my-task', {myContext: true}, {delayMillis: 60000});

Retry functionality for tasks and events is implemented using (Dead Letter Exchanges)[https://www.rabbitmq.com/dlx.html] and (Per-Queue Message TTL)[https://www.rabbitmq.com/ttl.html] similarly to the retry functionality described in greater detail below.

`#registerTaskConsumer(taskName, consumeFn, options={})`

Registers a function for consuming a specific task

const consumeOptions = {
  retry: {
    backoff: {
      type: 'exponential'
    },
    // Retry at most two times (initial attempt, first retry, second retry)
    maxAttempts: 2
  }
};

const consumerTag = await coinifyRabbit.registerTaskConsumer('my-task', async(context, task) => {
  // Resolve to ACK task, removing it from the queue
  // Reject and task will not be ACK'ed

  // context is the same as enqueued context object
  // task is object of {taskName, uuid, time}
  console.log({context, task});
}, consumeOptions);

// consumerTag is used to cancel consumer again at a later point. (Not yet implemented)

The given taskName will be prefixed with '<serviceName>.' to produce a full task name, which is used for consumption. <serviceName> is defined in options.service.name in CoinifyRabbit constructor or directly in options object.

The following properties can be set in options:

retry: Configure retry mechanism for this consumer. See Retry section for more information
uniqueQueue: Create a unique queue (true) instead of default behaviour (false) where each instance of the service consumes from the same queue. Setting this to true will cause the event to be consumed by each event consumer.
consumer: Consumer-specific options. Must be an object with the following properties:
- prefetch: Prefetch value for this consumer. See Prefetch section for more information.
service: Service-specific options. Must be an object with the following properties:
- name: Overrides the options.service.name set in the CoinifyRabbit constructor. Prefixes the consumed task name with name and a dot (.).

Retry

Retry functionality for tasks and events is implemented using (Dead Letter Exchanges)[https://www.rabbitmq.com/dlx.html] and (Per-Queue Message TTL)[https://www.rabbitmq.com/ttl.html]:

When consumption of a message fails, a retry mechanism (see options.retry argument to #registerTaskConsumer()) determines whether the message should be retried at a later point in time, and if so, how much time to wait (the delay) until the next attempt.

If the message should not be retried (i.e. consumer is configured to not retry, or maximum number of retry attempts reached) the message will be republished to the fanout exchange with the name defined in options.exchanges.failed, which defaults to '_failed'. To this exchange is bound a single queue with the name defined in options.queues.failed, which also defaults to '_failed'. Failed messages will remain here until manually removed.

If the message should be retried with a delay of t milliseconds, it will be re-published to the direct exchange with the name options.exchanges.retry. To this exchange is bound queues with the names options.queues.retryPrefix + '.' + t + 'ms', which are bound to the exchange. The queues are configured to have messages expire after t milliseconds, and republished back to the default direct, using the name of the original queue as the routing key.

When registering a consumer, the following retry properties can be set in the options argument:

retry: Specify how (if at all) performing the task should be retried on failure (if consumeFn rejects). If not specified, defaults no retry (false). If specified, must be an false or an object with the following properties:
- backoff: Backoff definition. If specified, must be an object with the following properties:
  - type: Backoff type: Must be 'exponential' or 'fixed'. Defaults to fixed
    - For exponential backoff, the delay until next retry is calculated as (delay * (base ^ n)), where n is the current attempt (0-indexed). First retry is thus always after delay seconds
    - For fixed backoff, the delay until next retry is always delay
  - delay: Delay in seconds for first retry. Defaults to 16
  - base: (Only for exponential type) The base number for the exponentiation. Defaults to 2
- maxAttempts: The maximum number of retry attempts. Defaults to 12. If set to e.g. 1, the task will at most be run twice: One for the original attempt, and one retry attempt. Setting this to 0 is the same as setting retry: false.

`consumeFn` usage

If consumeFn rejects with an Error that has noRetry: true property set, the task will not be retried regardless of what the options.retry settings specify.

Prefetch

Prefetch values (limits on the number of unacknowledged messages) can be set both on a per-channel and per-consumer basis.

Per-channel value is set in the configuration value channel.prefetch.

Per-consumer value is set by default in the configuration value consumer.prefetch, which can be overridden for individual consumers using the options.consumer.prefetch argument to registerEventConsumer and registerTaskConsumer functions.

NOTE: When overriding default per-consumer prefetch value (using options.consumer.prefetch argument), you must take to register consumers serially (i.e. not in parallel) due to possible race conditions mixing up prefetch values.

See (Consumer prefetch)[https://www.rabbitmq.com/consumer-prefetch.html] and (Confirms)[https://www.rabbitmq.com/confirms.html] for more information.

Failed Messages

As described in the section about retry, all failed messages will end up in the _failed queue. We can then consume them and manually re-enqueue the messages to a specified queue we want to retry by using the functions below.

`#registerFailedMessageConsumer(consumeFn, options={})`

Registers a function for consuming a task or event from the queue of failed messages

const consumerTag = await coinifyRabbit.registerFailedMessageConsumer(async(routingKey, message) => {
  // Resolve to ACK task, removing it from the queue
  // Reject and task will bet NACK'ed and re-enqueued

  // routingKey is the name of the queue that the message was failed from
  // message is object of {eventName|taskName, context, uuid, time, attempts}
  console.log({context, message});
});

#registerFailedMessageConsumer bears resemblance to #registerTaskConsumer and #registerEventConsumer, however it will not need to match to any (event or task) name.

The following properties can be set in options:

consumer: Consumer-specific options. Must be an object with the following properties:
- prefetch: Prefetch value for this consumer. See Prefetch section for more information.

`#enqueueMessage(queueName, messageObject)`

Enqueues a message to a specific queue. This can be of type event or task message

const messageObject = {
  eventName: fullEventName, // serviceName + '.' + eventName
  context: context,
  uuid: 'd51bbaed-1ee8-4bb6-a739-cee5b56ee518', // Actual UUID generated upon emit
  time: 1504865878534 // Timestamp of event, in milliseconds since UNIX epoc
}

const result = await coinifyRabbit.enqueueMessage('events.accounting.trade.trade-completed', messageObject);

// result is true if message was enqueued correctly.

Failed Message Handling

It is possible to setup and use #registerFailedMessageConsumer and #enqueueMessage for handling failed message and evaluating them for re-enqueueing:

const consumerTag = await coinifyRabbit.registerFailedMessageConsumer(async(routingKey, message) => {
  // Logic for determining whether the failed message
  // should be re-enqueued or if other action should be taken.

  // If it wishes to re-enqueue do:
  const result = await coinifyRabbit.enqueueMessage(routingKey, message);
});

Alternatively, if one is in a scenario where all failed messages should be re-enqueued right away, it can be done as:

const consumerTag = await coinifyRabbit.registerFailedMessageConsumer(async (routingKey, message) => coinifyRabbit.enqueueMessage(routingKey, message));

Suggestions for improvement

Ping functionality for service health check
CLI scripts to emit events / enqueue tasks
Split main lib code into smaller files

Usage no npm install needed!

README

node-rabbitmq

Major version changes

Implementation details

Connection/channel failure

CoinifyRabbit API

JavaScript

TypeScript

new CoinifyRabbit(options)

#shutdown(timeout=null): Promise<void>

Events

Topology

Event message

Example

#emitEvent(eventName, context, options={}): Promise<{eventName, context, uuid, time}>

#registerEventConsumer(eventKey, consumeFn, options = {}): Promise<string>

eventKey wildcards

Examples

Tasks

Topology

Task message

Example

#enqueueTask(taskName, context, options={}): Promise<{taskName, context, uuid, time}>

Delayed tasks

#registerTaskConsumer(taskName, consumeFn, options={})

Retry

consumeFn usage

Prefetch

Failed Messages

#registerFailedMessageConsumer(consumeFn, options={})

#enqueueMessage(queueName, messageObject)

Failed Message Handling

Suggestions for improvement

`CoinifyRabbit` API

`new CoinifyRabbit(options)`

`#shutdown(timeout=null): Promise<void>`

`#emitEvent(eventName, context, options={}): Promise<{eventName, context, uuid, time}>`

`#registerEventConsumer(eventKey, consumeFn, options = {}): Promise<string>`

`eventKey` wildcards

`#enqueueTask(taskName, context, options={}): Promise<{taskName, context, uuid, time}>`

`#registerTaskConsumer(taskName, consumeFn, options={})`

`consumeFn` usage

`#registerFailedMessageConsumer(consumeFn, options={})`

`#enqueueMessage(queueName, messageObject)`